Clock products
| Parameter | Minimum | Typical | Maximum | Unit | Condition | |
| Frequency Range | 5 | - | 125 | MHz | - | |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition | |
| Voltage range | 3.3, 5.0, 12, custom | V | - | |||
| Startup power consumption | - | - | 3.5 | W | - | |
| Stable power consumption | - | - | 1.5 | W | Steady state @ 25℃ | |
| Parameter | Minimum | Typical | Maximum | Unit | Condition | |
| Sine Wave | Power | 0 | - | 15 | dBm | Load: 500 |
| Harmonics | - | - | -40 | dBc | ||
| Spurious | - | - | -75 | dBc | ||
| Square wave | High level | 1.8 | V | Load: 15pF | ||
| Low level | 0.3 | V | ||||
| Rise/Fall Edge Time |
10 | ns | ||||
| Duty Cycle | 40 | 50 | 60 | % | ||
| Parameter | Minimum | Typical | Maximum | Unit | Condition | |
| Temperature Stability | ±1 | - | ±1000 | ppb | @25℃ | |
| Short-term Stability | - | - | 5 | E-12 | @10MHz | |
| Voltage fluctuation | -5 | - | 5 | ppb | Vs±5% | |
| Load fluctuation | -5 | - | 5 | ppb | Load±5% | |
| Day aging | ±0.3 | - | ±5 | ppb | After 30 days of continuous operation | |
| Year aging | 30 | - | 1000 | ppb | After 30 days of continuous operation | |
| Heating time | - | - | 10 | minutes | @25℃ | |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Voltage control voltage | ±3 | - | ±10 | V | - |
| Frequency adjustment range | ±0.1 | - | ±50 | ppm | - |
| Linearity | - | - | 10% | - | - |
| slope | - | - | |||
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| @1Hz | - | -95 | - | dBc | - |
| @10Hz | - | -125 | - | dBc | - |
| @100Hz | - | -145 | - | dBc | - |
| @1kHz | - | -150 | - | dBc | - |
| @10kHz | - | -155 | - | dBc | - |
| @100kHz | - | -155 | - | dBc | - |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Optional operating temperature | -20℃~70℃;-40℃~80℃; -40℃~85℃;-55℃~85℃;-55℃~105℃;Custom made |
- | |||
| Storage temperature | -55℃ to 125℃ | - | |||
| Quality Grade | Industrial grade, general military grade | - | |||
| Localization rate | 100% localization can be achieved | - | |||
Small size
Low power consumption
Temperature drift can reach: 10ppb@-40℃-85℃
High temperature stability
Full temperature drift can reach 2ppb
Low phase noise: -160dBc@1kHz
SMD package, easy for customers to assemble
Low height, minimum height of 7mm
High temperature stability
Full temperature drift can reach 1ppb
Low phase noise: -170dBc@1kHz@100MHz
High temperature stability
Full temperature drift can reach 0.5ppb
Low phase noise: -160dBc@1kHz@10MH
Low aging, annual aging rate better than 30ppb
High temperature stability, dual thermostatic bath technology
The whole process temperature drift can reach 0.1ppb
Low aging rate: annual aging rate is better than 20ppb, up to 5ppb
High temperature stability
High frequency temperature drift can reach 10ppb
Low phase noise: -160dBc@1kHz,@10MHz
1PPS high retention capability, can be maintained within 5us for 24 hours
High frequency temperature drift can reach 0.1ppb
High-precision frequency output, frequency accuracy can reach 1E-11
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition | |
| Frequency range | 5-2025 | MHz | - | |||
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition | |
| Voltage range | 3.3、5、12、Custom made | V | - | |||
| Startup power consumption | - | - | 0.5 | W | - | |
| Stable power consumption | - | - | 0.5 | W | - | |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition | |
| Sine Wave | Power | 0 | - | 15 | dBm | Load:500 |
| Harmonic | - | - | -30 | dBc | ||
| Spurious | - | - | -75 | dBc | ||
| Square wave | High level | 1.8 | V | |||
| Low level | 0.3 | V | ||||
| Rise/Fall Time | 10 | ns | ||||
| Duty Cycle | 40 | 50 | 60 | % | ||
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition | |
| Temperature stability | - | - | 1 | ppm | ||
| Short-term stability | - | 1 | - | E-10 | @10MHz | |
| Voltage fluctuations | ±2 | - | 士10 | ppb | Vs±5% | |
| Load fluctuation | ±2 | - | ±10 | ppb | Load±5% | |
| Day aging | ±2 | - | 士10 | ppb | After 30 consecutive days of work | |
| Years of aging | - | 1 | ppm | After 30 consecutive days of work | ||
| Poor frequency stability | - | - | 1.5 | ppm | SMD package after 2 reflow Relative nominal frequency value |
|
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Phase Noise | - | -85 | - | dBc/Hz | SSB@10Hz |
| - | -118 | - | SSB@100Hz | ||
| - | -145 | - | SSB@1kHz | ||
| - | -160 | - | SSB@10kHz | ||
| - | -165 | - | SSB@100kHz |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Frequency regulation voltage | 0.0 | - | 5 | V | - |
| ESC frequency range | ±3 | - | ±10 | ppm | |
| Linearity | - | - | 10 | 士% | - |
| Slope |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Optional operating temperature | -20℃~70℃;-40℃~80℃; -40℃~85℃;-55℃~85℃;-55℃~105℃;Custom made |
- | |||
| Storage temperature | -55℃ to 125℃ | - | |||
| Quality level | Industrial grade, general military grade | - | |||
| Package type | SMD patch, pin | - | |||
| Localization rate | 100% localization can be achieved | - | |||
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition | |
| Frequency range | 5-2025 | MHz | - | |||
| Parameter | Minimum value | Typical value | Maximum value | Unit | Test conditions | |
| Voltage range | 3.3, 5, 12, custom | V | ||||
| Startup power consumption | 0.1 | 3.5 | 5 | W | ||
| Stable power consumption | 0.1 | 1.3 | 3 | W | Room temperature | |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition | |
| Sine wave | Power | 0 | - | 15 | dBm | Load:500 |
| Harmonic | - | - | -30 | dBc | ||
| Spurious | - | - | -75 | dBc | ||
| Square Wave | High level | 1.8 | V | |||
| Low level | 0.3 | V | ||||
| Rise/Fall Time | 10 | ns | ||||
| Duty Cycle | 40 | 50 | 60 | % | ||
| Parameter | Minimum | Typical | Maximum | Unit | Condition | |
| Accuracy | ±1 | - | ±10 | ×10-1 | After locking for 1 hour, 24-hour average | |
| Temperature characteristics -55℃~+85℃ |
±1 | - | ±10 | ×10-9 | 1/2 temperature cycle, refer to GJB1648A-2011 Related regulations |
|
| Short-term stability | ±5 | - | ±30 | ×10-1 | Temperature stability, no EMI/EMC and other He interferes, test after one hour of power on |
|
| Day aging | ±2 | - | ±10 | ×10-10 | Test 30 days after power on for 30 days, refer to GJB1648A-2011 relevant regulations |
|
| Year aging | ±10 | - | ±500 | ×10-9 | Test 365 days after power on for 30 days, refer to According to the relevant provisions of GJB1648A-2011 |
|
| Year aging | - | - | 1 | ppm | After 30 days of continuous operation | |
| Frequency deviation | - | - | 1.5 | ppm | After 2 reflows of SMD package Relative nominal frequency value |
|
| Tracking accuracy | ±10 | - | ±30 | ns | 12 hours of observation after second lock | |
| Timekeeping index | ±5 | - | ±100 | us | 24 hours of timekeeping after 2 hours of effective tracking | |
| Index description | Minimum value | Typical value | Maximum value | Unit | Test conditions | |
| Waveform | CMOS | - | ||||
| High Voltage Level | 2.4 | - | 3.3 | V | - | |
| Low Voltage Level | - | - | 0.4 | V | - | |
| Pulse Width | 0.001 | - | 500 | ms | - | |
| Jitter Deviation | -100 | - | 100 | ns | 1s Jitter | |
| Rise Time | - | - | 10 | ns | - | |
| Indicator Description | Minimum Value | Typical Value | Maximum Value | Unit | Test Conditions | |
| Tracking Status | 2.8 | - | 3.3 | V | Load<5mA | |
| 守时状态 | - | - | 0.4 | V | Load<5mA | |
| Category | Index requirements | Test conditions | ||||
| Quick capture | From free running to synchronization with external 1pps, time ≤10min | Enter free running after power-on, external 1pps input is valid, Complete synchronization within 10min |
||||
| Lock | From free running to locking, time ≤15min | External 1pps input is valid, output 1pps phase deviation is less than the specified value or frequency accuracy is less than the specified range | ||||
| Hold | Enter hold, time ≤5s | Under lock condition, no external 1pps input or input is invalid or enable pin is set to low level 0V | ||||
| Index Description | Minimum Value | Typical Value | Maximum Value | Unit | Test Conditions | |
| Waveform | CMOS | - | ||||
| High level voltage | 3 | 3.3 | 3.5 | V | - | |
| Low level voltage | - | - | 0.4 | V | - | |
| Rise time | - | - | 10 | ns | - | |
| Pulse width | 0.1 | 500 | ms | - | ||
| Index description | Minimum value | Typical value | Maximum value | Unit | Test conditions | |
| Output in stable locked state | 3 | 3.3 | 3.5 | V | Load<5mA | |
| Output in other states | - | - | 0.4 | V | Load<5mA | |
| Index description | Minimum value | Typical value | Maximum value | Unit | Test conditions | |
| Receiver high level input voltage | 2.7 | - | 3.6 | V | - | |
| Receiver low level input voltage | - | - | 0.4 | V | - | |
| Transmitter high level input voltage | 2.7 | - | - | V | - | |
| Transmitter low level input voltage | - | - | 0.4 | V | - | |
| Serial port protocol | 115200-N-8-1 | - | ||||
| Description | Minimum | Typical | Maximum | Unit | Test Conditions | |
| Optional Operating Temperature | 0℃~60℃; -40℃~70℃; 40℃~85℃; |
0℃~70℃; -55℃~70℃; -55℃~85℃;Custom made |
20℃~70℃; -40℃~80℃; |
- | ||
| Storage temperature | -55℃ to 125℃ | - | ||||
| Quality level | Industrial grade, general military grade | - | ||||
| Localization rate | 100% localization can be achieved | - | ||||
Frequency self-calibration function, external synchronization signal is effective
Synchronous timestamp retention function can reduce the system overhead of the same distribution in the radio service time slot
With self-check and reporting functions
Frequency self-calibration function, external synchronization signal is effective
Synchronous timestamp retention function can reduce the system overhead of the same distribution in the radio service time slot
Ultra-low power consumption, power consumption is less than 0.07w
Frequency self-calibration function, external synchronization signal is effective
Synchronous timestamp retention function can reduce the system overhead of the same distribution in the radio service time slot
Ultra-low power consumption, less than 0.07w
Frequency self-calibration function, external synchronization signal is effective
Synchronous timestamp retention function can reduce the system overhead of the same distribution in the radio service time slot
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition | |
| Frequency range | 10-2025 | MHz | - | |||
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition | |
| Supply voltage | 3.3, 5, 12, Custom | V | - | |||
| Supply current | - | - | 30 | mA | - | |
| Parameter | Minimum | Typical | Maximum | Unit | Condition | |
| Sine Wave | Power | 0 | - | 15 | dBm | Load:500 |
| Harmonic | - | - | -40 | dBc | ||
| Spurious | - | - | -75 | dBc | ||
| Square wave | High level | 2.8 | V | 15pF | ||
| Low level | 0.3 | V | ||||
| Rise/Fall Time | 10 | ns | ||||
| Duty Cycle | 40 | 50 | 60 | % | ||
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition | |
| Accuracy | - | ±10 | ppm | 24-hour average after 1 hour of lock | ||
| Temperature characteristics -40℃~+85℃ |
- | - | ±15 | 1/2 temperature cycle, refer to the relevant provisions of GJB1648A-2011 | ||
| Year aging | - | 1 | After 30 days of continuous operation | |||
| Frequency deviation | - | - | 1.5 | Relative nominal frequency value after 2 reflows of SMD package | ||
| Parameter | Minimum | Typical | Maximum | Unit | Condition | |
| Phase Noise | - | -120 | - | dBc/Hz | SSB@100Hz | |
| - | -145 | - | SSB@1kHz | |||
| - | -165 | - | SSB@10kHz | |||
| - | -170 | - | SSB@100kHz | |||
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| ESC frequency range | ±20 | - | - | ppm | |
| Linearity | Positive slope | ||||
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Shock | Half sine wave 50g 11ms/3 directions: | IEC 68-2-27 Test Ea | |||
| Sinusoidal vibration | Acceleration: 10g, amplitude: 0.75mm, 10Hz~2000Hz; 30 minutes per cycle, 1 hour in each direction (X, Y, Z3 directions); | IEC 68-2-06 Test Fc | |||
| Drop | Free fall on a concrete or steel surface from a height of 100cm | IEC 68-2-32 | |||
| Description | Minimum value | Typical value | Maximum value | Unit | Test conditions |
| Optional operating temperature | -20C~70℃; -40C~85℃; |
-55C~70℃ -55℃~85℃;Custom made |
- | ||
| Storage temperature | -55℃ to 125℃ | - | |||
| Quality level | Industrial grade, general military grade | - | |||
| Package type | SMD patch, pin | - | |||
| Localization rate | 100% localization can be achieved | - | |||
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Frequency range | 5-2025 | MHz | - | ||
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Supply voltage | 3.3, 5.0, 12, Custom | V | - | ||
| Starting power | - | - | 1.6 | W | - |
| Stable power | - | - | 0.6 | W | Steady state @25℃ |
| Load | - | 50 | - | Ω | - |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Output waveform | Sine wave | - | - | ||
| Output Power | 5 | - | - | dBm | - |
| Harmonic | - | - | -30 | dBc | - |
| Output waveform | Square wave | - | - | ||
| High level | 2.4 | - | - | V | CMOS,TTL,P/ECL |
| Low level | - | - | 0.3 | V | CMOS,TTL,P/ECL |
| Duty Cycle | 40 | - | 60 | % | AtDC Reference |
| Rise/Fall Time | - | - | 10 | ns | 20%-80%Vout |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Day aging | - | - | 1 | ±ppb | After 30 consecutive days of work |
| Years of aging | - | - | 100 | ±ppb | After 30 consecutive days of work |
| Warming up | - | - | 30 | S | ≤±500ppb |
| - | - | 20 | ±ppb | Frequency changes within 10 minutes to 1 hour after power-on | |
| Temperature stability | - | - | 50 | ±ppb | Reference frequency@25℃ |
| Parameter | Minimum | Typical | Maximum | Unit | Condition |
| Phase Noise | - | -90 | - | dBc/Hz | SSB@10Hz |
| - | -120 | - | SSB@100Hz | ||
| - | -150 | - | SSB@1kHz | ||
| - | -170 | - | SSB@10kHz | ||
| - | -170 | - | SSB@100kHz | ||
| - | -170 | - | SSB@1MHz |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Frequency adjustment voltage | 0.0 | 2.5 | 5.0 | V | - |
| ESC frequency range | - | - | -2 | ±ppm | @0V |
| 2 | - | - | ±ppm | @3V | |
| Linearity | - | - | 10 | ±% | - |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Shock | Half sine wave 50g 11ms/3 directions: | IEC 68-2-27 Test Ea | |||
| Cibration | Acceleration: 10g, amplitude: 0.75mm, 10Hz~2000Hz; 30 minutes per cycle , 1 hour in each direction (X, Y, Z3 directions); |
IEC 68-2-06 Test Fc | |||
| Drop | Free fall on a concrete or steel surface from a height of 100cm | IEC68-2-32 | |||
| Description | Minimum value | Typical value | Maximum value | Unit | Test conditions |
| Optional operating temperature | -20℃~70℃; 40℃~85℃; |
-55℃~70℃; -55℃~85℃; |
- | ||
| Storage temperature | -55℃ to 85℃ | - | |||
| Quality Grade | Industrial grade, general military grade | - | |||
| Package type | SMD patch, pin | - | |||
| Localization rate | 100% localization can be achieved | - | |||
Small size and low power consumption OCXO product packaging
Small size
Low power consumption
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Frequency range | 5 | 100 | 120 | MHz | - |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Supply voltage | 3.3、5.0、12、Custom made | V | - | ||
| Starting power | - | - | 400 | mA | - |
| Stable power | - | - | 200 | mA | Steady state @25℃ |
| Load | - | 50 | - | Ω | - |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Output waveform | Sine wave | - | - | ||
| Output power | 14 | - | dBm | - | |
| Harmonics | - | - | -30 | dBc | - |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Initial frequency difference | - | - | 100 | ±ppb | Frequency adjustment voltage @1.5±0.2V |
| 99999990.0 | - | 100000010.0 | Hz | ||
| Operating temperature | -40 | - | 70 | ℃ | - |
| Day aging | - | - | 2 | ppb | After 30 days of continuous operation |
| Year aging | - | - | 200 | ppb | After 30 days of continuous operation |
| Temperature rise | - | - | 30 | ppb | Frequency change from 10min to 1H after power on |
| Frequency VS Power Supply Fluctuation | - | - | 5 | ppb | Vs±5% |
| Frequency VS Load Fluctuation | - | - | 5 | ppb | Load±5% |
| Temperature Stability | - | - | 100 | ppb | Reference Frequency@25℃ |
| Short Temperature | - | - | 0.00E+00 | - | 1s |
| Parameter | Minimum | Typical | Maximum | Unit | Condition |
| Phase Noise | - | -78.7 | - | dBc/Hz | SSB@1Hz |
| - | -110 | - | SSB@10Hz | ||
| - | -143.9 | - | SSB@100Hz | ||
| - | -171 | - | SSB@1kHz | ||
| - | -184.2 | - | SSB@10kHz | ||
| - | -184.6 | - | SSB@100kHz | ||
| - | -183.4 | - | SSB@1MHz |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Frequency adjustment voltage | 0.0 | 5.0 | 10.0 | V | - |
| ESC frequency range | - | - | -2 | ppm | @0V |
| 2 | - | - | ppm | @10V | |
| Linearity | - | - | 10 | 士% | - |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Shock | Half sine wave 50g 11ms/3 directions: | IEC 68-2-27 Test Ea | |||
| Vibration | Acceleration: 10g, Amplitude: 0.75mm, 10Hz~2000Hz; 30 minutes per cycle, 1 hour in each direction (X, Y, Z3 directions); | IEC 68-2-06 Test Fc | |||
| Drop | Free fall on a concrete or steel surface from a height of 100cm | IEC 68-2-32 | |||
| Description | Minimum value | Typical value | Maximum value | Unit | Test conditions |
| Optional operating temperature | -20℃~70℃; -40℃~85℃; |
-55℃~70℃; -55℃~85℃; |
- | ||
| Storage temperature | -55℃ to 100℃ | - | |||
| Quality grade | Industrial grade, general military grade | - | |||
| Package type | SMD patch, pin | - | |||
| Localization rate | 100% localization can be achieved | - | |||
Ultra-low phase noise product packaging
High vibration resistance
Ultra-low noise
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition | |
| Frequency range | - | 100 | - | MHz | - | |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition | |
| Supply voltage | 3.3, 5.0, 12,Custom | V | - | |||
| Starting power | - | - | 400 | mA | - | |
| Stable power | - | - | 150 | mA | - | |
| Load | - | 50 | - | Ω | - | |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition | |
| Output waveform | Sine wave | - | - | |||
| Output power | 5 | - | 12 | dBm | - | |
| Harmonics | - | - | -30 | dBc | - | |
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition | |
| Initial frequency difference | 99999990.0 | - | 100000010.0 | Hz | Frequency adjustment voltage @4.5±0.2V | |
| - | - | 100 | ±ppb | |||
| Operating temperature | -45 | - | 80 | ℃ | - | |
| Year aging | - | - | 100 | ±ppb | After 30 days of continuous operation | |
| Temperature stability | - | - | 100 | ppb | Reference frequency @ 25℃ | |
| Temperature rise | - | - | 30 | S | <1ppm@25℃ | |
| - | - | 30 | ±ppb | Power-on 10min-1Hz frequency change | ||
| Frequency VS power supply fluctuation | - | - | 5 | ±ppb | Vs±5% | |
| Frequency VS load fluctuation | - | - | 5 | ±ppb | Load±5% | |
| Parameter | Minimum | Typical | Maximum | Unit | Condition | |
| Static Phase Noise | - | -100 | - | dBc/Hz | SSB@10Hz | |
| - | -130 | - | SSB@100Hz | |||
| - | -160 | - | SSB@1kHz | |||
| - | -170 | - | SSB@10kHz | |||
| - | -170 | - | SSB@100kHz | |||
| Phase noise under vibration | - | -145 | - | SSB@1kHz | ||
| - | -160 | - | SSB@10kHz | |||
| - | -165 | - | SSB@100kHz | |||
| Parameter | Minimum value | Typical value | Maximum value | Unit | Condition |
| Frequency adjustment voltage | 0.0 | 4.5 | 9.0 | V | - |
| ESC frequency range | -3 | - | -1 | mA | @0V |
| 1 | - | 3 | mA | @9V | |
| 线性度 | - | - | 10 | ±% | - |
| Description | Minimum value | Typical value | Maximum value | Unit | Test conditions |
| Optional operating temperature | -20℃~70℃; 40℃~85℃; |
-55℃~70℃; -55℃~85℃; |
- | ||
| Storage temperature | -55℃ to 100℃ | - | |||
| Quality grade | Industrial grade, general military grade | - | |||
| Package type | SMD patch, pin | - | |||
High vibration resistance series product packaging
Vibration resistance reaches
Good reliability
Frequency Hopping Filter
High Power Frequency Hopping Filter
Ultra-low loss
Small size
Excellent out-of-band suppression
Low loss, wide bandwidth
Fast tuning speed
Excellent anti-interference ability
Low insertion loss
High power
High isolation
Can combine multiple signals
Frequency Hopping Notch Filter
High stopband suppression
Low insertion loss
Multiple notch points can be switched at will
Low power electronically adjustable filter
Low power consumption
Ultra-small size
Ultra-wide frequency band coverage
Excellent anti-interference capability
Low Power Frequency Hopping Filter
High selectivity
2W average input power
Ultra-low sensitivity
High reliability
Tuning time 5us
Medium Power Frequency Hopping Filter
Small size and light weight
Large power capacity
Excellent anti-interference
Excellent out-of-band suppression
Broadband high suppression
Small size, low power consumption
Good temperature stability
High suppression, low loss
Small size, light weight
Good temperature stability
Power amplifier chip
Realize RF signal power amplification function
Power amplifier tube over-temperature, over-current, standing wave status reporting function
Power amplifier has full phase stability in high, medium and low ranges
High gain
High power
Information storage and data sampling functions
RF signal power amplification function
Power amplifier tube over-temperature, over-current, standing wave status reporting function
Information storage function and data sampling function
Antenna
Wide operating frequency
High gain
Good out-of-roundness
Strong reliability
Wide operating frequency
High gain
Good out-of-roundness
High reliability
Large power capacity
Traditional omnidirectional antennas generally refer to omnidirectional antennas in the form of monopole, dipole, or monopole-loaded and dipole-loaded antennas. Such antennas exhibit nearly 360° uniform radiation in the horizontal plane and different beam widths in the vertical plane depending on the gain. They are mostly used in handheld, backpack, and vehicle-mounted platforms.
The portable directional antenna unfolds the radiator and reflector when working, and can be retracted when not working. It has the advantages of high gain, low side lobe, and easy to carry.
RF Front End
5G self-organizing network terminal communication
High gain, high power
Small size, sip technology, low power consumption;
It has an intelligent control network for transceiver gain, which can finely manage the antenna port power during transmission to improve the standby time of the handheld station.
It has an intelligent matching filter network, which dynamically matches the final power amplifier to improve the power amplifier efficiency, and reconstructs the antenna frequency to improve the antenna gain. The improvement effect on the V band is very obvious, and it also includes harmonic filtering function.
